|
Hawaii Marine Templates
|
Templates quickly eliminate laborious computational tasks
and as added bonus
give your work a
neat and professional appearance.
Some Excel, MathCAD and Word templates on this website can benefit almost anybody,
this includes professionals like attorneys, contractors, technicians,
skilled labor, researchers, and scientists, not just marine types. It is a
lot easier to apply a template than to create from scratch
and then format it for
presentation and printing. So leveraging
your efforts (by incorporating the work of others), gives your work a polished
look and saves yourself time and money too!
That said, most of the
spreadsheets and templates
on this site are especially
suited for utilization by
nautical specialists. This includes naval architects, ship design engineers, marine
engineers, ocean engineers, dredge engineers, marine
salvage engineers, maritime regulators, boat designers
and yacht designers.
Never the less, in many cases these
templates can be used by many types of
non-nautical engineers. For example structural engineers, mechanical
engineers, civil engineers, petroleum
engineers, and engineering technicians.
Ship, commercial boat & yacht
owners and operators can also benefit from boiler plate templates in
this site.
There are also general business
tracking templates that can be easily utilized
by most professionals. Lawyers, paralegals, expert witnesses, scientists,
researchers, contractors, technicians, draft-persons and any others that charge by the
hour, go by cost plus, labor and materials or simply want to track their
expenses as they occur.
Important Notice:
Due to changes in international law, we no longer will accept
purchases from any country except the United States. This change
is effective July 1, 2008 .
|
Template
Index
|
| Name
(click titles for more info) |
Program
Required |
Cost |
Download |
|
Weights and Moments Sheet - English Units, from
weights
and centroids (cgs) of components it computes total
weight and centroids (cgs)
of all elements combined.
Product ID Number: WM-e. |
MS Excel
... more info |
Free |
Download Now! |
|
Weights and Moments Sheet - Metric Units, from
weights and centroids (center of gravities, cgs) of components it computes total weight and centroids,
centers of gravities, of all elements combined. Product ID Number:
WM-m. |
MS Excel
... more info |
Free |
Download Now! |
| |
|
|
|
|
Area Properties for Large or Complex Cross Section - English
Units General used for
ship cross sections, but can be used to obtain properties for any large or
complex structural cross section. From component sectional area
properties, this template computes the total sectional area
properties of the all the components combined. This includes total
area, area center, moment of inertia and section
modulus.
Product No. SMs-e. |
MS Excel
... more
details |
$32.00 |
|
|
Area Properties for Large or Complex Cross Section -
Metric
Units General used for
ship cross sections, but can be used to obtain properties for any large or
complex structural cross section. From component sectional area
properties, this template computes the total sectional area
properties of the all the components combined. This includes total
area, area center, moment of inertia and section
modulus.
Product No. SMs-m. |
MS Excel
... more
details |
$32.00 |
|
| |
|
|
|
|
Section Modulus for Framing Members - English
Units From component sectional area
properties, this quick and neat template computes the total sectional area
properties of the all the components combined. This includes total
area, area center, section modulus and moment of inertia.
Product No. SMF-e. |
MS Excel
... more
details |
$18.00 |
|
|
Section Modulus for Framing Members - Metric
Units From component sectional area
properties, this quick and neat template computes the total sectional area
properties of the all the components combined. This includes total
area, area center, section modulus and moment of inertia.
Product No. SMF-m. |
MS Excel
... more
details |
$18.00 |
|
|
Additional MathCAD Area Property Templates (Properties Include
Total Area, Centroid, Moment of Inertia and
Section Modulus (English Units)
|
| |
|
|
|
|
Tankage Summary - English Units From
individual tank properties this convenient spreadsheet calculates the
cumulative effect of all tanks combined. This includes each tank's
and the combined free surface effects. For each tank, the user may
select a value from zero to one hundred percent full. Product
No. Tanks-e. |
MS Excel
... more
details |
$7.75 |
|
|
Tankage Summary - Metric Units From
individual tank properties this convenient spreadsheet calculates the
cumulative effect of all tanks combined. This includes each tank's
and the combined free surface effects. For each tank, the user may
select a value from zero to one hundred percent full.
Product No. Tanks-m. |
MS Excel
... more
details |
$7.75 |
|
| |
|
|
|
|
Trim & Stability Sheet - English Units For a
given vessel condition, this spreadsheet computes trim present and
metacentric height. Curves of Form inputs, Light Ship, passenger,
crew, cargo and consumables weight information are required. This
spreadsheet only works accurately if the trim obtained from it is less
than 1% of vessel length. Product # TS-e. |
MS Excel
... additional
information |
$25.00 |
|
|
Trim & Stability Sheet - Metric Units
For a given vessel condition, this spreadsheet computes trim present and
metacentric height. Curves of Form inputs, Light Ship, passenger,
crew, cargo and consumables weight information are required. This
spreadsheet only works accurately if the trim obtained from it is less
than 1% of the vessel length. Product Number TS-m. |
MS Excel
... additional
information |
$25.00 |
|
| |
|
|
|
|
Displacement Sheet
(Sectional Area Curve) -
English Units For a
given vessel condition, with sectional area inputs this spreadsheet does
numerical integrations using Simpson's Methods. It computes
displaced volume, weight, longitudinal and vertical centers of buoyancy. Product
Number Disp-e. |
MS Excel
... additional
information |
$10.00 |
|
|
Waterplane Sheet (Half Breadth Inputs) -
English Units For a given
vessel condition, with half breadth inputs this spreadsheet does numerical
integrations using Simpson's Methods. It computes waterplane area,
longitudinal center of floatation, longitudinal and transverse moment of
inertias. Product # WP-e. |
MS Excel
... additional
information |
$10.00 |
|
|
Waterline Input/Output Sheet -
English Units
Input for this sheet are combined data from the
Displacement Sheet, Waterplane Sheet, draft data and maximum cross
sectional area. This sheet outputs tons per
inch, longitudinal & transverse metacentric radii, longitudinal and
transverse metacenter heights from Baseline, block coefficient, prismatic
coefficient and midships coefficient. Product Number WL-IO-e. |
MS Excel
... additional
information |
Free |
Download Now! |
Waterline Hydrostatics Sheet - English Units
At a given
waterline condition, this
template computes a vessel's
hydrostatics characteristics. It combines
and streamlines the Displacement Sheet, Waterplane Sheet and the Waterline
Input/Output Sheet. If this sheet is utilized
for three waterlines, "Curves of Form" can be generated from the combined
output.
Product # WL-hydro-e. |
MS Excel
... additional
information |
$15.00 |
|
| |
|
|
|
Towline Pull, Static Criterion (English Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for
compliance with 46CFR173.095(b). This
template applies only to vessels that are equipped for towing and have
Z-Drives for propulsion (i.e. Tractor Tugs, Offshore Supply Vessels, Work
Boats and Fish Boats).
Product # TowStZ-e. |
MS Excel
... additional product data |
Free |
Download Now! |
Towline Pull, Static Criterion (Metric Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for
compliance with 46 CFR 173.095(b). This
template applies only to vessels that are equipped for towing and have
Z-Drives for propulsion (i.e. Tractor Tugs, Offshore Supply Vessels, Work
Boats and Fish Boats).
Product # TowStZ-m. |
MS Excel
... additional product data |
Free |
Download Now! |
Towline Pull, Dynamic Criterion (English Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for
compliance with 46 CFR 173.095(c) - (f). This
template applies only to vessels that are equipped for towing and have
Z-Drives for propulsion (i.e. Tractor Tugs, Offshore Supply Vessels, Work
Boats and Fish Boats).
Product # TowDyZ-e. |
MathCAD
... additional product data |
$40.00 |
|
Towline Pull, Dynamic Criterion (Metric Units) for Z-Drive Vessels
This template checks a vessel equipped to tow for
compliance with 46 CFR 173.095(c) - (f).
This template applies only to vessels that are equipped for towing and
have Z-Drives for propulsion (i.e. Tractor Tugs, Offshore Supply Vessels,
Work Boats and Fish Boats).
Product # TowDyZ-m. |
MathCAD
... additional product data |
$40.00 |
|
|
|
|
|
|
Tow Vessel, Dynamic Weather Criterion (English Units)
This template checks a vessel equipped to tow for
compliance with 46CFR174.145(a) - (f).
This template applies only to vessels that are equipped for towing (i.e.
Tractor Tugs, Offshore Supply Vessels, Work Boats and Fish Boats).
Product # TowWth-e. |
MathCAD
... additional product data |
$30.00 |
|
|
Tow Vessel, Dynamic Weather Criterion (Metric Units)
This template checks a vessel equipped to tow for
compliance with 46 CFR 174.145 (a) - (f).
This template applies only to vessels that are equipped for towing (i.e.
Tractor Tugs, Offshore Supply Vessels, Work Boats and Fish Boats).
Product # TowWth-m. |
MathCAD
... additional product data |
$30.00 |
|
|
|
|
|
|
Displacement &
Semidisplacement Hull Powering Calculations (English Units)
This template calculates displacement
& semi-displacement (or semi-planing) hull powering requirements utilizing two separate
methods. The first method is applicable to a wide range of vessel
types. The second method applies to trawler with optimized
displacement length ratios and prismatic coefficients. A range of
input speeds are evaluated and plotted. Product # Pwr-Disp. |
MS Excel
... additional
information |
$25.00 |
|
|
Planing Hull Powering Calculations
with Crouch's Constant (English Units)
This template calculates planing hull powering requirements
using Crouch's Constant. Calculations are made and plotted for a
range of input speeds. It applies only to planing speeds in which
the speed length ratio is equal to or greater than three. It also
calculates fuel consumption rate for all input speeds. Product # Pwr-Plng. |
MS Excel
... additional
information |
$20.00 |
|
|
Savitsky Planing Hull Calculations (English Units)
This method (either Long or Short Form) is
one of the primary methods applied by experienced boat designers and naval architects
to compute the hydrodynamic powering characteristics of planing vessels. This
boilerplate spreadsheet is designed to be simple to use, yet options are
present for an experienced expert to tweak the calculations as desired. Product # Savitsky. |
MS Excel
... additional
information |
$50.00 |
|
|
|
|
|
|
Advanced Sailing Boat Parameters with Recommended Target Values This spreadsheet
automatically calculates an extensive list of sailboat parameters and presents recommended target values for
instant assessment. Definitions for the various parameters are given and
usually accompanied by commentary. Outputs include
displacement length ratio, sail area displacement ratio, sail wetted
surface area ratio, length to beam ratio, hull speed, ballast ratio,
capsize factor and comfort factor. Product Number ASail-e. |
MS Excel
... additional product data |
$50.00 |
|
|
Sailboat Parameter Calculations
& Comparison Sheet This spreadsheet
automatically computes various primary ratios and parameters allowing quick comparisons
between similar sailing boats. Outputs include
displacement length ratio, sail area displacement ratio, sail wetted
surface area ratio, length to beam ratio, hull speed, ballast ratio,
capsize factor and comfort factor. Product Number
Sail-e. |
MS Excel
... additional product data |
$20.00 |
|
|
|
|
|
|
Project Time Log (Dollar
Currency) This
handy spreadsheet
automatically computes computes elapsed time spent and
labor cost for each session along with cumulative time and labor cost for
a project. Ideal for
keeping track of project labor data. Product Number TL-Dollars. |
MS Excel
... additional product data |
$5.00 |
|
|
Project Time Log (Euro
Currency) This
handy spreadsheet
automatically computes computes elapsed time spent and
labor cost for each session along with cumulative time and labor cost for
a project. Ideal for
keeping track of project labor data. Product Number TL-Euros. |
MS Excel
... additional product data |
$5.00 |
|
|
Project Time Log (Pounds
Sterling Currency) This
spreadsheet automatically computes computes elapsed time spent and
labor cost for each session along with cumulative time and labor cost for
a project. Ideal for
keeping track of project labor data. Product Number TL-Pounds. |
MS Excel
... additional product data |
$5.00 |
|
|
|
|
|
|
Owner's Requirements Form - English Units
This
handy
information request form is normally given to people who are seeking ship, yacht and boat design services.
Among other things information includes expected approximate
vessel size, hull
type, service requirements, operational zones, budgetary information,
equipment requirements and accommodations that are desired.
It also helps prospective home boat builders to
focus on their vessel goals. Product ID Number: OWNR-RQM. |
MS Word
... more info |
Free |
Download Now! |
The following templates
are
scheduled for release at a later date
 | Curves of Form
Sheets. This involves a summary table that is dynamically tied
into three or more draft evaluation sheets. |
|
Section Modulus Sheet, for
composite cross sections. Spreadsheet
for computing moment of inertia and section modulus for section made
of several materials. Templates as per NAVIC 8-87 are on the
agenda. |
|
Powering Calculations -
Make metric versions of the the presently available power templates in
English units. Additional planing calculative regimes that includes slow
speed planing boat operation, trim tab effects, appendage resistance
and air resistance to the Savitsky
spreadsheet already available. |
|
Fishboat Stability Calculations -
MathCAD templates for Torremolinos dynamic intact criterion, water on
deck criteria, severe wind and wave criteria. Calculations in
English units and as per 46 CFR 28.500 Subpart E - Stability. |
|
Mooring Analysis - obtaining proper scope for
depth, chain or line size. Results are dependent on vessel size
and proportion inputs. |
|
Propeller Matching - obtaining propeller horsepower and rpm as a
function of speed and checking it against the propulsion units
characteristics. |
|
Seakeeping Motion Checks - to avoid resonant parametric coupling
of roll, pitch and heave. This is effect is sometimes called
Dutch rolling. |
|
Dynamic Loading Effects - The inertial effects of ships motions on
weights are computed with this MathCAD template. |
|
Simplified Stability Test Calculations -
multiple page spreadsheet, Excel template. |
|
Stability Test Booklet - multiple page
spreadsheet, Excel template. |
|
Advanced Sailboat Parameters Template -
make this available also in metric units. It
is presently available only in English units. |
|
Dynamic Stability Criteria, Vessels of
Unusual Form - multiple page MathCAD template. |
|
Rudder Spreadsheet Calculations - determining required area, shaft
size, etc. |
|
Plus
much more ... contact us, at
hmt@hawaii-marine.com,
if you have an immediate need, maybe we already have a template for it! |
|
|
